Straightening nitinol wire requires careful handling to preserve its shape memory and superelastic properties: Gentle Tension: Apply gentle tension along the length of the wire to gradually straighten it without causing permanent deformation. Room Temperature: Straighten the wire at room temperature, avoiding excessive force that could alter its shape memory. Heat Treatment: If necessary, heat the wire slightly above its transformation temperature (around body temperature) to facilitate easier straightening. Cooling: Allow the wire to cool in a straightened position to lock in the new shape. Verification: Verify the wire's straightness and ensure it retains its shape memory through testing before use in applications. Proper handling and gradual straightening help maintain nitinol wire's integrity and ensure it performs effectively in medical devices, robotics, and other applications requiring precise shape retention.

Cutting Nitinol sheets can be challenging due to their shape memory properties. Using laser cutting or abrasive waterjet methods is effective, ensuring minimal heat impact and maintaining material integrity.

A nitinol wire used in tibial fixation is typically not removed after the bone has healed. Nitinol's biocompatibility allows it to remain in the body without causing adverse reactions. Its shape memory and superelastic properties provide stable, durable support during the healing process. However, the decision to remove the wire depends on the specific medical case and the surgeon's judgment. In some cases, if complications arise or if the patient experiences discomfort, removal might be considered. Generally, nitinol wires are intended to remain in place long-term.

Nitinol, a unique alloy of nickel and titanium, is renowned for its shape memory and superelastic properties. These characteristics make it a preferred material in various industries, particularly in medical devices and robotics. Understanding how to set the shape of Nitinol wire is crucial for harnessing its full potential. This blog will delve into the shape-setting process and address some frequently asked questions about Nitinol wire.

Nitinol wire is made from an alloy composed primarily of nickel (Ni) and titanium (Ti), typically in nearly equal proportions, with the nickel content slightly exceeding that of titanium, usually around 55% nickel and 45% titanium. This unique composition endows nitinol with its distinctive properties, such as the shape memory effect and superelasticity. Ni(Min):54%
Material:nickel titanium alloy or Ti-Ni Alloy
AF:-20℃~10℃
Surface:mechanical polishing
Density:6.45g/cm3
Size:customization
MOQ:1kg
Application:Industrial and medical

The temperature on nitinol wire refers to its transition temperature, known as its transformation temperature. This is the temperature range where nitinol undergoes a reversible phase change, exhibiting its unique properties like shape memory effect and superelasticity. Above this temperature range, nitinol returns to its original shape (shape memory effect), while below it, it remains in a deformed state until heated back into the transformation temperature range. This characteristic temperature behavior is crucial in various applications, from medical devices to aerospace components, where precise control over material properties is essential.

Forming memory wire nitinol involves: Shaping: Bend or twist the nitinol wire into the desired shape using tools or fixtures. Heat Treatment: Heat the wire above its transformation temperature, typically between 450°C and 550°C (842°F to 1022°F), for a few minutes to set the shape. Quenching: Rapidly cool the wire in water or air while maintaining the shape to lock in the memory effect. Verification: Test the wire to ensure it retains the shape and exhibits the desired shape memory and superelastic properties. This process ensures that the nitinol wire will return to its pre-set shape when heated.

Nitinol wire is exceptionally strong and durable, with a tensile strength ranging from 800 to 1,900 MPa (megapascals). Its unique properties of shape memory and superelasticity allow it to withstand significant deformation and stress without permanent damage. Nitinol's high fatigue resistance and biocompatibility make it ideal for demanding applications such as medical devices, stents, and actuators. Its ability to recover its original shape after deformation adds to its overall robustness and reliability in various industrial and medical uses.

Nitinol wire has gained significant attention in various fields due to its unique properties and diverse applications. This blog delves into the intricacies of nitinol wire, covering its manufacturing process, popular uses in medical devices, automotive industry, and beyond, as well as addressing common questions associated with this versatile material.

Ni(Min):54%
Material:nickel titanium alloy or Ti-Ni Alloy
AF:-20℃~10℃
Surface:mechanical polishing
Density:6.45g/cm3
Size:customization
MOQ:100pcs
Application: Industry

Ni(Min):54%
Material:nickel titanium alloy or Ti-Ni Alloy
AF:-20℃~10℃
Surface:mechanical polishing
Density:6.45g/cm3
Size:customization
MOQ:500pcs
Application:Industrial and medical

Ni(Min):54%
Material:nickel titanium alloy or Ti-Ni Alloy
AF:-20℃~10℃
Surface:mechanical polishing
Density:6.45g/cm3
Size:customization
MOQ:500pcs
Application:Industrial and medical